Enterasys b5 User Manual

show spantree vlanlist
Enterasys B5 CLI Reference 9-15
Example
ThisexampleshowshowtomapFID2backtoSID0:
B5(su)->clear spantree mstmap 2
show spantree vlanlist
UsethiscommandtodisplaytheSpanningTreeID(s)assignedtooneormoreVLANs.
Syntax
show spantree vlanlist [vlan-list]
Parameters
Defaults
Ifnotspecified,SIDassignmentwillbedisplayedforallVLANs.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaytheSIDsmappedtoVLAN1.Inthiscase,SIDs2,16and42
aremappedtoVLAN1.Forthisinformationtodisplay,theSIDinstancemustbecreatedusingthe
setspantreemsticommandasdescribedin“setspantreemsti”onpage 9
‐12,andtheFIDsmust
bemappedtoSID 1usingthesetspantreemstmapcommandasdescribedin“setspantree
mstmap”onpage 9‐14:
B5(su)->show spantree vlanlist 1
The following SIDS are assigned to VLAN 1: 2 16 42
show spantree mstcfgid
UsethiscommandtodisplaytheMSTconfigurationidentifierelements,includingformatselector,
configurationname,revisionlevel,andconfigurationdigest.
Syntax
show spantree mstcfgid
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
vlan‐list (Optional)DisplaysSIDsassignedtospecificVLAN(s).

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English