Enterasys b5

show spantree disputedbpduthreshold
Enterasys B5 CLI Reference 9-53
Example
ThisexampleshowshowtosetthedisputedBPDUthresholdvalueto5:
B5(rw)->set spantree disputedbpduthreshold 5
show spantree disputedbpduthreshold
UsethiscommandtodisplaythecurrentvalueofthedisputedBPDUthreshold.
Syntax
show spantree disputedbpduthreshold
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaythecurrentdisputedBPDUthreshold:
B5(rw)->show spantree disputedbpduthreshold
The disputed BPDU threshold value is 0
clear spantree disputedbpduthreshold
UsethiscommandtoreturnthedisputedBPDUthresholdtoitsdefaultvalueof0,meaningthat
disputedBPDUtrapsshouldnotbesent.
Syntax
clear spantree disputedbpduthreshold
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetthedisputedBPDUthresholdtothedefaultof0:
B5(rw)->clear spantree disputedbpduthreshold