Enterasys b5

set port lacp
7-54 Port Configuration
Global Link Aggregation state : Disabled
Port Instance: ge.1.1 Port enable state: Disabled
ActorPort: 1 PartnerAdminPort: 1
ActorSystemPriority: 32768 PartnerOperPort: 1
ActorPortPriority: 32768 PartnerAdminSystemPriority: 32768
ActorAdminKey: 32768 PartnerOperSystemPriority: 32768
ActorOperKey: 32768 PartnerAdminPortPriority: 32768
ActorAdminState: -----GLA PartnerOperPortPriority: 32768
ActorOperState: -F---GLA PartnerAdminKey: 1
ActorSystemID: 00:1F:45:47:81:FC PartnerOperKey: 1
SelectedAggID: None PartnerAdminState: -----GSA
AttachedAggID: None PartnerOperState: ------SA
MuxState: Detached PartnerAdminSystemID: 00:00:00:00:00:00
DebugRxState: Portdisable PartnerOperSystemID: 00:00:00:00:00:00
ThisexampleshowshowtodisplaysummarizedLACPstatusinformationforportge.1.12:
B5(su)->show port lacp port ge.1.12 status summary
Port Aggr Actor System Partner System
Pri: System ID: Key: Pri: System ID: Key:
ge.1.12 none [(32768,00e0639db587,32768),(32768,000000000000, 1411)]
ThisexampleshowshowtodisplayLACPcountersforportge.1.12:
B5(su)->show port lacp port ge.1.12 counters
Port Instance:
ge.1.12
LACPDUsRx: 11067
LACPDUsTx: 0
IllegalRx: 0
UnknownRx: 0
MarkerPDUsRx: 0
MarkerPDUsTx: 0
MarkerResponsePDUsRx: 0
MarkerResponsePDUsTx: 374
set port lacp
Usethiscommandtosetlinkaggregationparametersfor oneormoreports.Thesesettingswill
determinethespecifiedunderlyingphysicalports’abilitytojoinaLAG,andtheiradministrative
stateonceaggregated.
Syntax
set port lacp port port-string {[aadminkey aadminkey] [aadminstate {lacpactive |
lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef | lacpexpire}]
[aportpri aportpri] [asyspri asyspri] [enable | [disable] [padminkey padminkey]
[padminport padminport] [padminportpri padminportpri] [padminstate {lacpactive |
lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef | lacpexpire}]
[padminsysid padminsysid] [padminsyspri padminsyspri]