Enterasys b5

show ip icmp redirect
Enterasys B5 CLI Reference 19-19
Syntax
ip icmp redirect enable
no ip icmp redirect enable
Parameters
None.
Defaults
Bydefault,sendingICMPredirectstotheCPUisenabledgloballyandonallinterfaces.
Mode
Routerglobalconfigurationmode:B5(su)‐>router(Config)#
Interfaceconfigurationmode:B5(su)‐>Router1(Config ‐if(Vlan1))#
Usage
YoucanusethiscommandinrouterglobalconfigurationmodetoenableordisablesendingICMP
redirectsgloballyontheswitch.
Youcanusethiscommandinrouterinterfaceconfigurationmodetoenableordisablesending
ICMPredirectsonlyonspecificinterfa ces.
Examples
ThisexampledisablessendingICMPredirectsontheinterfaceVLAN5.
B5(su)->router#configure
B5(su)->router(Config)#interface vlan 5
B5(su)->Router1(Config-if(Vlan 5))# no ip icmp redirect enable
ThisexampledisablessendingICMPredirectsglobally.
B5(su)->router#configure
B5(su)->router(Config)#no ip icmp redirect enable
show ip icmp redirect
UsethiscommandtodisplaythestatusofsendingICMPredirectsataglobalorinterfacelevel.
Syntax
show ip icmp redirect {status | interface [vlan vlan-id]}
Parameters
Defaults
IfnoVLANisspecifiedwiththeinterfaceparameter,informationforallVLANinterfacesis
displayed.
status DisplaytheglobalICMPredirectstatus.
interface DisplayICMPredirectstatusfor interfaces.
vlanvlan‐id (Optional)DisplayICMPredirectstatusforthespecifiedVLAN.