Enterasys b5

clear logging interface
Enterasys B5 CLI Reference 14-13
B5(rw)->router(Config)#exit
B5(rw)->router#exit
B5(rw)->router>exit
B5(rw)->set logging interface vlan 100
B5(rw)->show logging interface
vlan 100 192.168.10.1
clear logging interface
UsethiscommandtocleartheinterfaceusedforthesourceIPaddressofthesystemloggingback
tothedefaultoftheHostinterface.
Syntax
clear logging interface
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThiscommandreturnstheinterfaceusedforthesourceIPaddressofthesystemloggingbackto
thedefaultoftheHostinterface.
B5(rw)->show logging interface
vlan 100 192.168.10.1
B5(rw)->clear logging interface
B5(rw)->