Enterasys b5

show maclock
22-58 Authentication and Authorization Configuration
Commands
show maclock
UsethiscommandtodisplaythestatusofMAClockingononeormoreports.
Syntax
show maclock [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,MAClockingstatuswillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayMAClockinginformationforge.1.1.
B5(su)->show maclock ge.1.1
MAC locking is globally enabled
Port Port Trap Aging Max Static Max FirstArrival Last Violating
Number Status Status Status Allocated Allocated MAC Address
For information about... Refer to page...
show maclock 22-58
show maclock stations 22-59
set maclock enable 22-60
set maclock disable 22-61
set maclock 22-61
clear maclock 22-62
set maclock static 22-63
clear maclock static 22-63
set maclock firstarrival 22-64
clear maclock firstarrival 22-65
set maclock agefirstarrival 22-65
clear maclock agefirstarrival 22-66
set maclock move 22-66
set maclock trap 22-67
port‐string (Optional)DisplaysMAClockingstatusforspecifiedp ort(s).Fora
detaileddescriptionofpossibleport‐stringvalues,referto“ PortString
SyntaxUsedintheCLI”onpage 7‐1.