Enterasys b5

To Next Page

To Previous Page

clear rmon channel

Enterasys B5 CLI Reference 15-19

Example

ThisexampleshowshowtocreateanRMONchannelentry:

B5(rw)->set rmon channel 54313 ge.2.12 accept failed control on description

"capture all"

clear rmon channel

UsethiscommandtoclearanRMONchannelentry.

Syntax

clear rmon channel index

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

ThisexampleshowshowtoclearRMONchannelentry2:

B5(rw)->clear rmon channel 2

show rmon filter

UsethiscommandtodisplayoneormoreRMONfilterentries.

Syntax

show rmon filter [index index | channel channel]

Parameters

Defaults

Ifnooptionsarespecified,informationforallfilterentrieswillbedisplayed.

Mode

Switchcommand,read‐only.

Example

ThisexampleshowshowtodisplayallRMONfilterentriesandchannelinformation:

index Specifiesthechannelentrytobecleared.

indexindex|

channelchannel

(Optional)Displaysinformationaboutaspecificfilterentry,oraboutall

filterswhichbelongtoaspecificchannel.