To Next Page

To Previous Page

clear lacp

7-50 Port Configuration

Usage

LACPwillusethisvaluetoformanoperkey.Onlyunderlyingphysicalportswithoperkeys

matchingthoseoftheiraggregatorswillbeallowedtoaggregate.Thedefaultadminkeyvaluefor

allLAGportsis32768.

Example

ThisexampleshowshowtosettheLACPadminkeyto2000forLAGport6:

B5(su)->set lacp aadminkey lag.0.6 2000

clear lacp

UsethiscommandtoclearLACPsystempriorityoradminkeysettings.

Syntax

clear lacp {[asyspri] [aadminkey port-string]}

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

Thisexampleshowshowtocleartheactor adminkeyforLAGport6:

B5(su)->clear lacp aadminkey lag.0.6

set lacp static

Usethiscommandtodisableorenablestaticlinkaggregation,ortoassignoneormoreunderlying

physicalportstoaLinkAggregationGroup(LAG).

Syntax

set lacp static {disable | enable} | lagportstring [key] port-string

Parameters

asyspri Clearssystem priority.

aadminkeyport‐string Resetsadminkeysforoneormoreportstothedefaultvalueof32768.

disable|enable Disablesorenablesstaticlinkaggregation.

lagportstring SpecifiestheLAGaggregatorporttowhichnewportswillbeassigned.

Enterasys b5 User Manual

Questions and Answers: