Enterasys b5

show cos port-type
11-34 Policy Classification Configuration
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheCoSconfigurationforallentriesexceptentries0‐7:
B5(su)->clear cos all-entries
show cos port-type
UsethiscommandtodisplayClassofServiceporttypeconfigurations.
Syntax
show cos port-type [irl [port-type]] [flood-ctrl [port-type]]
Parameters
Defaults
Ifnoparametersarespecified,inboundratelimitingandfloodcontrolinformationforallport
typesisdisplayed.
Mode
Switchcommand,read‐only.
Usage
TheB5implementationprovidesonedefaultporttype(0)fordesignatingavailableinboundrate
limitingorfloodcontrolresources.Porttype0includesallports.
Theporttype0IRLdescriptionis“B5100IRL,”whichindicatesthatthisporttypeprovidesa
maximumof100inboundratelimitingresourcesper
portgroup.Theporttype0floodcontrol
descriptionis“B53flood‐ctrl”whichindicatesthatthisporttypeprovidesamaximumof3flood
controlresourcesperportgroup.
Examples
Thisexampleshowsinboundrateli mitinginformationforporttype0.
B5(su)->show cos port-type irl 0
irl (Optional)Displaysinboundratelimitinginformation.
flood‐ctrl (Optional)Displaysfloodcontrolinformation.
port‐type (Optional)Displaysinformationforaspecificporttype.(Onlyporttype
0issupported.)