Enterasys b5 User Manual

Setting the Authentication Login Method
22-4 Authentication and Authorization Configuration
Theundecoratedformatissimplyastringthatspecifiesapolicyprofilename.Theundecorated
formatcannotbeusedformanagementaccessauthentication.
DecoratedFilter‐IDsareprocessedfirstbytheswitch.IfnodecoratedFilter‐IDsarefound,then
undecoratedFilter‐IDsareprocessed.IfmultipleFilter‐IDs arefound
thatcontainconflicting
values,aSyslogmessageisgenerated.
Setting the Authentication Login Method
Purpose
Toconfiguretheauthenticationloginmethodtobeusedformanagement.
Commands
Thecommandsusedtoconfiguretheauthenticationloginmethodarelistedbelow.
show authentication login
Usethiscommandtodisplaythecurrentauthenticationloginmethodformanagement.
Syntax
show authentication login
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaythecurrentauthenticationloginmethod.
B5(rw)->show authentication login
Authentication Login List Method 1 Method 2 Method 3
------------------------- -------- -------- --------
any tacacs radius local
For information about... Refer to page...
show authentication login 22-4
set authentication login 22-5
clear authentication login 22-5

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English