Enterasys b5

clear snmp community
Enterasys B5 CLI Reference 8-15
Usage
Whenyouconfigureacommunityname,ifyoudon’tspecifyacontextwiththecontextparameter,
thedefault(NULL)contextisapplied.Ifyouwanttochangeaconfiguredcontextbacktothe
default(NULL)context,enterahyphenasthevalueofthecontextparameter,asshowninthe
Examples
below.
Examples
ThisexampleshowshowtosetanSNMPcommunitynamecalled“vip.”
B5(su)->set snmp community vip
TheexampleshowshowtosetthecontextforSNMPcommunity“vip”tothedefaultNULL
context.
B5(su)->set snmp community vip context -
clear snmp community
UsethiscommandtodeleteanSNMPcommunityname.
Syntax
clear snmp community name
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtodeletethecommunityname“vip.”
B5(su)->clear snmp community vip
Configuring SNMP Access Rights
Purpose
ToreviewandconfigureSNMPaccessrights,assigningviewingprivilegesandsecuritylevelsto
SNMPusergroups.
name SpecifiestheSNMPcommunitynametoclear.