Enterasys b5 User Manual

show igmpsnooping mfdb
13-8 IGMP Configuration
Parameters
Defaults
Ifnogroupisspecified,informationforallgroupsisdisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampledisplaysthestaticIGMPportsforVLAN20.
B5(su)->show igmpsnooping static 20
--------------------------------------------------------------------------------
Vlan Id = 20 Static Multicast Group Address = 233.11.22.33 Type = IGMP
IGMP Port List = ge.1.1
show igmpsnooping mfdb
Usethiscommandtodisplaymulticastforwardingdatabase(MFDB)information.
Syntax
show igmpsnooping mfdb [stats]
Parameters
Defaults
Ifstatsisnotspecified,allMFDBtableentrieswillbedisplayed.
Mode
Switchcommand,read‐only.
Examples
Thisexampleshowshowtodisplaymulticastforwardingdatabaseentries:
B5(su)->show igmpsnooping mfdb
MAC Address Type Description Interfaces
----------------------- ------- ---------------- -------------------------
00:14:01:00:5E:02:CD:B0 Dynamic Network Assist Fwd: ge.1.1,ge.3.1,ge.4.1
00:32:01:00:5E:37:96:D0 Dynamic Network Assist Fwd: ge.4.7
00:32:01:00:5E:7F:FF:FA Dynamic Network Assist Fwd: ge.4.7
Thisexampleshowshowtodisplaymulticastforwardingdatabasestatistics:
B5(su)->show igmpsnooping mfdb stats
Max MFDB Table Entries......................... 256
Most MFDB Entries Since Last Reset............. 1
Current Entries................................ 0
vlan‐list SpecifiestheVLANforwhichtodisplaystaticIGMPports.
groupgroup (Optional)SpecifiestheIGMPgroupforwhichtodisplaystaticIGMP
ports.
stats (Optional)DisplaysMFDBstatistics.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English