Enterasys b5 User Manual

show snmp access
Enterasys B5 CLI Reference 8-17
Example
ThisexampleshowshowtodisplaySNMPaccessinformation:
B5(su)->show snmp access
Group = SystemAdmin
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Group = NightOperator
Security model = USM
Security level = noAuthNoPriv
Read View = All
Write View =
Notify View = All
Context match = exact match
Storage type = nonVolatile
Row status = active
Table 8‐6providesanexplanationofthecommandoutput.
Table 8-6 show snmp access Output Details
Output Field What It Displays...
Group SNMP group name.
Security model Security model applied to this group. Valid types are: SNMPv1,
SNMPv2c, and SNMPv3 (User based - USM).
Security level Security level applied to this group. Valid levels are:
• noAuthNoPrivacy (no authentication required)
• AuthNoPrivacy (authentication required)
• authPriv (privacy -- most secure level)
Read View Name of the view that allows this group to view SNMP MIB objects.
Write View Name of the view that allows this group to configure the contents of the
SNMP agent
.
Notify View Name of the view that allows this group to send an SNMP trap message.
Context match Whether or not SNMP context match must be exact (full context name
match) or a partial match with a given prefix.
Storage type Whether access entries for this group are stored in volatile, nonvolatile
or read-only memory.
Row status Status of this entry: active, notInService, or notReady.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English