Enterasys b5 User Manual

show macauthentication session
Enterasys B5 CLI Reference 22-27
show macauthentication session
UsethiscommandtodisplaytheactiveMACauthenticatedsessions.
Syntax
show macauthentication session
Parameters
None.
Defaults
Ifport‐stringisnotspecified,MACsessioninformationwillbedisplayedforallMAC
authenticationports.
Mode
Switchcommand,read‐only.
Usage
ChangingtheReauthPeriodwiththesetmacauthenticationreauthperiodcommanddoesnot
affectcurrentsessions.Newsessionsdisplaythecorrectperiod.
Example
ThisexampleshowshowtodisplayMACsessioninformation:
B5(su)->show macauthentication session
Port MAC Address Duration Reauth Period Reauthentications
----- ----------------- ---------- ------------- -----------------
ge.1.2 00:60:97:b5:4c:07 0,00:52:31 3600 disabled
Table 22‐4providesanexplanationofthecommandoutput.
Reauth Period Reauthentication period for this port. Default value of 30 can be changed using the
set macauthentication reauthperiod command (page 22-33).
Auth Allowed Number of concurrent authentications supported on this port.
Auth Allocated Maximum number of MAC authentications permitted on this port.
Reauthentications Whether or not reauthentication is enabled or disabled on this port. Set using the set
macauthentication reauthentication command (page 22-32).
Table 22-3 show macauthentication Output Details (Continued)
Output Field What It Displays...
Table 22-4 show macauthentication session Output Details
Output Field What It Displays...
Port Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 7-1.
MAC Address MAC address associated with the session.
Duration Time this session has been active.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English