Enterasys b5 User Manual

show tacacs
23-2 TACACS+ Configuration
show tacacs
UsethiscommandtodisplaythecurrentTACACS+configurationinformationandstatus.
Syntax
show tacacs [state]
Parameters
Defaults
Ifstateisnotspecified,allTACACS+configurationinformationwillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayallTACACSconfigurationinformation.
B5(ro)->show tacacs
TACACS+ status:Disabled
TACACS+ session accounting state:disable
TACACS+ command authorization state:disable
TACACS+ command auccounting state:disable
TACACS+ single connect state:Disabled
TACACS+ service: exec
TACACS+ session authorization A-V pairs:
access-level attribute value
read-only priv-lvl 0
read-write priv-lvl 1
super-user priv-lvl 15
TACACS+ Server IP address Port Timeout
-------------- ---------- ------ -------
1 192.168.10.1 49 10
Table 23‐1providesanexplanationofthecommandoutput.
state (Optional)DisplaysonlytheTACACS+clientstatus.
Table 23-1 show tacacs Output Details
Output... What it displays...
TACACS+ status Whether the TACACS+ client is enabled or disabled.
TACACS+ session accounting
state
Whether TACACS+ session accounting is enabled or disabled.
TACACS+ command
authorization state
Whether TACACS+ command authorization is enabled or disabled.
TACACS+ command accounting
state
Whether TACACS+ command accounting is enabled or disabled.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English