Enterasys b5

Setting Basic Switch Properties
Enterasys B5 CLI Reference 3-9
Example
Thisexampleshowshowtosetloginattemptsto5andlockouttimeto30minutes:
B5(su)->set system lockout attempts 5 time 30
Setting Basic Switch Properties
Purpose
TodisplayandsetthesystemIPaddressandotherbasicsystem(switch)properties.
Commands
For information about... Refer to page...
show ip address 3-10
set ip address 3-10
clear ip address 3-11
show ip protocol 3-12
set ip protocol 3-12
show ip route 3-13
show system 3-13
show system hardware 3-15
show system utilization 3-16
set system utilization 3-17
clear system utilization 3-17
set system temperature 3-18
clear system temperature 3-19
show time 3-20
set time 3-20
show summertime 3-21
set summertime 3-21
set summertime date 3-22
set summertime recurring 3-22
clear summertime 3-23
set prompt 3-24
show banner motd 3-24
set banner motd 3-25
clear banner motd 3-25
show version 3-26