Enterasys b5

clear linkflap action
7-30 Port Configuration
Defaults
None.
Mode
Switchmode,read‐write.
Example
Thisexampleshowshowtosetthelinkflapviolationactiononportge.1.4togeneratingaSyslog
entry.
B5(rw)->set linkflap action ge.1.4 gensyslogentry
clear linkflap action
Usethiscommandtoclearreactionstoalinkflapviolation.
Syntax
clear linkflap action port-string {disableInterface | gensyslogentry | gentrap |
all}
Parameters
Defaults
Ifport‐stringisnotspecified,actionswillbeclearedonallports.
Mode
Switchmode,read‐write.
Example
Thisexampleshowshowtoclearthelinkflapviolationactiononportge.1.4togeneratinga
Syslogentry.
B5(rw)->clear linkflap action ge.1.4 gensyslogentry
set linkflap threshold
Usethiscommandtosetthelinkflapactiontriggercount.
Syntax
set linkflap threshold port-string threshold-value
port‐string Specifiestheport(s)onwhichtoclearthelinkflapaction.
disableInterface Clearsthereactionasdisablingtheinterface.
gensyslogentry Clearsthereactionasgeneratingasyslogentry.
gentrap ClearsthereactionasgeneratinganSNMPtrap.
all Clearsthereactionasalloftheabove.