Enterasys b5 User Manual

show port counters
Enterasys B5 CLI Reference 7-5
Examples
Thisexampleshowshowtodisplayallcounterstatistics,includingMIB2networktrafficand
trafficthroughthedeviceforge.3.1:
B5(su)->show port counters ge.3.1
Port:
ge.3.1 MIB2 Interface: 1
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets 0
In Unicast Pkts 0
In Multicast Pkts 0
In Broadcast Pkts 0
In Discards 0
In Errors 0
Out Octets 0
Out Unicasts Pkts 0
Out Multicast Pkts 0
Out Broadcast Pkts 0
Out Errors 0
802.1Q Switch Counters
----------------------
Frames Received 0
Frames Transmitted 0
Thisexampleshowshowtodisplayallge.3.1portcounterstatisticsrelatedtotrafficthroughthe
device.
B5(su)->show port counters ge.3.1 switch
Port: ge.3.1 Bridge Port: 2
802.1Q Switch Counters
-----------------------
Frames Received 0
Frames Transmitted 0
Table 7‐2providesanexplanationofthecommandoutput.
Table 7-2 show port counters Output Details
Output Field What It Displays...
Port Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 7-1.
MIB2 Interface MIB2 interface designation.
Bridge Port IEEE 802.1D bridge port designation.
MIB2 Interface
Counters
MIB2 network traffic counts
802.1Q Switch
Counters
Counts of frames received, transmitted, and filtered.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English