Enterasys b5

Transmit Queue Monitoring Configuration show txqmonitor flowcontrol
5-6
logging 2
ignorepause 5
disableinterface 10
show txqmonitor flowcontrol
Usethiscommandtodisplaytheflowcontrolinformationforoneormoreports.
Syntax
show txqmonitor flowcontrol [port-string]
Parameters
Defaults
Ifnoport‐stringisspecified,flowcontrolinformationforallportsisdisplayed.
Mode
Switchmode,read‐only.
Usage
Thiscommanddisplayscountersfortransmittedandreceivedpauseframesperport.
Example
Thisexampleshowsthethepauseframecountsforports1throu gh3.
B5(su)->show txqmonitor flowcontrol ge.1.1-3
port TX Pause Count RX Pause Count
-------- --------------- --------------
ge.1.1 0 0
ge.1.2 0 0
ge.1.3 0 146
show txqmonitor port
Usethiscommandtodisplaytransmitqueuemonitoringinformationforoneormoreports.
Syntax
show txqmonitor port [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,informationforallportsisdisplayed.
port‐string (Optional)Specifiestheportorportsforwhichtodisplayflowcontrol
information.
port‐string (Optional)Specifiestheportsforwhichtodisplayinformation.