Enterasys b5

set port disable
7-8 Port Configuration
set port disable
Usethiscommandtoadministrativelydisableoneormoreports.Whenthiscommandis
executed,inadditiontodisablingthephysicalEthernetlink,theportwillnolongerlearnentries
intheforwardingdatabase.
Syntax
set port disable port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtodisablege.1.1:
B5(su)->set port disable ge.1.1
set port enable
Usethiscommandtoadministrativelyenableoneormoreports.
Syntax
set port enable port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoenablege.1.3:
B5(su)->set port enable ge.1.3
port‐string Specifiestheport(s)todisable.Foradetaileddescriptionofpossibleport‐
stringvalues,referto“PortStringSyntaxUsedintheCLI”onpage7‐1.
port‐string Specifiestheport(s)toenable.Foradetaileddescriptionofpossibleport‐
stringvalues,referto“PortStringSyntaxUsedintheCLI”onpage7‐1.