Enterasys b5 - Clear Gvrp

clear gvrp
10-24 802.1Q VLAN Configuration
ThedefaultconditionontheswitchisGVRPenabledglobally,disabledperports.
Mode
Switchcommand,read‐write.
Examples
ThisexampleshowshowtoenableGVRPgloballyonthedevice:
B5(su)->set gvrp enable
ThisexampleshowshowtodisableGVRPgloballyonthedevice:
B5(su)->set gvrp disable
ThisexampleshowshowtoenableGVRPonge.1.3:
B5(su)->set gvrp enable ge.1.3
clear gvrp
UsethiscommandtoclearGVRPstatusononeormoreports.
Syntax
clear gvrp [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,GVRPstatuswillbeclearedtothedefaultconditionforallports.
ThedefaultconditionontheswitchisGVRPdisabledperport.
Mode
Switchcommand,read‐write.
Usage
ThiscommanddoesnotaffecttheglobalstateofGVRP.ToenableordisableGVRPglobally,use
thesetgvrpenable|disablecommand.
Example
ThisexampleshowshowtoclearGVRPstatusonallportsonthedevice:
B5(su)->clear gvrp
port‐string (Optional)ClearsGVRPstatusonspecific port(s).Foradetaileddescriptionof
possibleport‐stringvalues,referto“PortStringSyntax UsedintheCLI”on
page 7‐1.