To Next Page

To Previous Page

Dynamic ARP Inspection Commands

17-20 DHCP Snooping and Dynamic ARP Inspection

set vlan egress 10 ge.1.2 untagged

set vlan egress 192 ge.1.1 untagged

DHCP Snooping Configuration

set dhcpsnooping enable

set dhcpsnooping vlan 1 enable

set dhcpsnooping vlan 10 enable

set dhcpsnooping vlan 192 enable

set dhcpsnooping verify mac-address disable

set dhcpsnooping trust port ge.1.1 enable

Dynamic ARP Inspection Configuration

set arpinspection vlan 1

set arpinspection vlan 10

set arpinspection vlan 192

set arpinspection trust port ge.1.1 enable

Dynamic ARP Inspection Commands

set arpinspection vlan

UsethiscommandtoenabledynamicARPinspectionononeormoreVLANs,andoptionally,

enableloggingofinva lidARPpackets.

Syntax

set arpinspection vlan vlan-range [logging]

For information about... Refer to page...

set arpinspection vlan 17-20

set arpinspection trust 17-21

set arpinspection validate 17-22

set arpinspection limit 17-23

set arpinspection filter 17-24

show arpinspection access-list 17-24

show arpinspection ports 17-25

show arpinspection vlan 17-26

show arpinspection statistics 17-26

clear arpinspection validate 17-27

clear arpinspection vlan 17-28

clear arpinspection filter 17-29

clear arpinspection limit 17-30

clear arpinspection statistics 17-31

Enterasys b5 User Manual

Questions and Answers: