To Next Page

To Previous Page

set dot1x

22-18 Authentication and Authorization Configuration

Port : 1 Auth-Config

PAE state: Initialize

Backend auth state: Initialize

Admin controlled directions: Both

Oper controlled directions: Both

Auth controlled port status: Authorized

Auth controlled port control: Auto

Quiet period: 60

Transmission period: 30

Supplicant timeout: 30

Server timeout: 30

Maximum requests: 2

Reauthentication period: 3600

Reauthentication control: Disabled

set dot1x

Usethiscommandtoenableordisable802.1Xauthentication,toreauthenticateoneormoreaccess

entities,ortoreinitializeoneormoresupplicants.

Syntax

set dot1x {enable | disable | port {init | reauth} {true | false} [port-string]}

Parameters

Defaults

Ifnoportsarespecified,thereinitializationorreauthenticationsettingwillbeappliedtoallports.

Mode

Switchcommand,read‐write.

Usage

Disabling802.1Xauthenticationglobally,bynotenteringaspecificport‐stringvalue,willenable

theEAPpass‐throughfeature.EAPpass‐throughallowsclientauthenticationpacketstobe

forwardedunmodifiedthroughtheswitchtoanupstreamdevice.

Examples

Thisexampleshowshowtoenable802.1X:

B5(su)->set dot1x enable

Thisexampleshowshowtoreinitializege.1.2:

B5(rw)->set dot1x port init true ge.1.2

enable|disable Enablesordisables802.1X.

port Enableordisable802.1Xreauthenticationorinitializationcontrolononeor

moreports.

init|reauth Configureinitializationorreauthenticationcontrol.

true|false Enable(true)ordisable(false)reinitialization/reauthentication.

port‐string (Optional)Specifiestheport(s)toreinitializeorreauthenticate.

Enterasys b5 User Manual

Questions and Answers: