Enterasys b5 User Manual

set port inlinepower
4-6 Configuring System Power and PoE
set port inlinepower
UsethiscommandtoconfigurePoEparametersononeormoreports.
Syntax
set port inlinepower port-string {[admin {off | auto}] [capability {802.3af |
802.3at}] [priority {critical | high | low}] [type type]}
Parameters
Defaults
Atleastoneoftheoptionalparametersmustbeentered.
Mode
Switchcommand,read‐write.
Oper The operational mode of the port. Values displayed can be:
• Searching — no device is connected to the port.
• Delivering Power — power being delivered to connected device.
• Over Budget — connected device requires more power than the switch can
allocate to that port.
• Overload — connected device consumed more power than it was allowed.
• Other Fault — another PoE error has been detected, such as a short on the
PoE load, error with PoE signaling, general error detection.
Priority The port’s priority for PoE allocation. Values can be critical (highest), high or
low. Can be set with the set port inlinepower command.
Class The PoE class of the connected powered device.
Power (W) The amount of power being delivered to the port.
Capability Whether the port is able to support 802.3af devices only or 802.3at (and also
802.3af) devices. Can be set with the set port inlinepower command.
Power Select If a port is capable of supporting 802.3at and 802.3af devices, this field displays
the power level the port is supplying — either 802.3af or 802.3at.
Table 4-3 show port inlinepower Output Details (Continued)
Output Field What it Displays
port‐string Specifiestheport(s)onwhichtoconfigurePoE.
adminoff|auto (Optional)SetsthePoEadministrativestatetooff(disabled)orauto(on).
Whenyousettheadminstatetooff,PoEpowerisdisabledonthatport.
capability802.3af|
802.3at
(Optional)Setsthesporttosupporteither802.3af
powerlevelor802.3at
andalso802.3afpowerlevels.
prioritycritical|
high|low
(Optional)Setstheport(s)priorityforthePoEallocationalgorithmto
critical(highest),highorlow.
typetype (Optional)Specifies astringdescribingthetypeofdeviceconnectedtoa
port.Thestringcanbeamaximum
of20characters.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English