show lldp port local-info
6-18 Discovery Protocol Configuration
Defaults
Ifport‐stringisnotspecified,portlocationconfigurationinformationwillbedisplayedforall
ports.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplayportlocationinformationforthreeports.
B5(ro)->show lldp port location-info ge.1.1-3
Ports Type Location
-------- ------------- -------------------------
ge.1.1 ELIN 1234567890
ge.1.2 ELIN 1234567890
ge.1.3 ELIN 1234567890
show lldp port local-info
Usethiscommandtodisplaythelocalsysteminformationstoredforoneormoreports.Youcan
usethisinformationtodetectmisconfigurationsorincompatibilitiesbetweenthelocalportand
theattachedendpointdevice(remoteport).
Syntax
show lldp port local-info [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,localsysteminformationwillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplaythelocalsysteminformationstoredforportge.4.1.Table 6‐4
describestheoutputfieldsofthiscommand.
B5(rw)->show lldp port local-info ge.4.1
Local Port :
ge.4.1 Local Port Id: ge.4.1
--------------------
Port Desc : ... 1000BASE-TX RJ45 Gigabit Ethernet Frontpanel Port
Mgmt Addr : 10.21.64.100
Chassis ID : 00-E0-63-93-74-A5
Sys Name : LLDP PoE test Chassis
Sys Desc : Enterasys Networks, Inc.
Sys Cap Supported/Enabled : bridge,router/bridge
port‐string (Optional)Displayslocalsysteminformationforoneorarangeof
ports.