Enterasys b5 User Manual

clear vlanauthorization
Enterasys B5 CLI Reference 22-51
Defaults
Bydefault,administrativeegressissettountagged.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenabletheinsertionoftheRADIUSassignedVLANtoan802.1qtag
foralloutboundframesforports10through15onunit/modulenumber3.
B5(rw)->set vlanauthorization egress tagged ge.3.10-15
clear vlanauthorization
Usethiscommandtoreturnport(s)tothedefaultconfigurationofVLANauthorizationdisabled,
egressuntagged.
Syntax
clear vlanauthorization [port-string]
Parameters
Defaults
Ifnoportstringisentered,allportsawillberesettodefaultconfigurationwithVLAN
authorizationdisabledandegressframesuntagged.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowhowtoclearVLANauthorizationforallportsonslots3,4,and5:
B5(rw)->clear vlanauthorization ge.3-5.*
show vlanauthorization
DisplaystheVLANauthenticationstatusandconfigurationinformationforthespecifiedports.
Syntax
show vlanauthorization [port-string]
port‐string (Optional)Specifieswhichportsaretoberestoredtodefault
configuration.Ifnoportstringisentered,theactionwillbeaglobal
setting.Foradetaileddescriptionofpossibleport‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 7‐1.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English