Enterasys b5 User Manual

clear spantree fwddelay
Enterasys B5 CLI Reference 9-21
B5(su)->set spantree fwddelay 16
clear spantree fwddelay
UsethiscommandtoresettheSpanningTreeforwarddelaytothedefaultsettingof15seconds.
Syntax
clear spantree fwddelay
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtogloballyresetthebridgeforwarddelay:
B5(su)->clear spantree fwddelay
show spantree backuproot
UsethiscommandtodisplaythebackuprootstatusforanMSTinstance.
Syntax
show spantree backuproot [sid]
Parameters
Defaults
IfaSIDisnotspecified,thenstatuswillbeshownforSpanningTreeinstance0.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaythestatusofthebackuprootfunctiononSID0:
B5(rw)->show spantree backuproot
Backup root is set to disable on sid 0
sid (Optional)DisplaybackuprootstatusforaspecificSpanningTree
identifier.Validvaluesare0‐4094.Ifnotspecified,SID0isassumed.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English