Enterasys b5

set banner motd
Enterasys B5 CLI Reference 3-25
set banner motd
Usethiscommandtosetthebannermessageofthedaydisplayedatsessionlogin.
Syntax
set banner motd message
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtosetthemessageofthedaybannertoread:“Thissystembelongsto
XYZCorporation.Useofthissystem isstrictlylimitedtoauthorizedpersonnel.”
B5(rw)->set banner motd "\tThis system belongs to XYZ Corporation.\nUse of this
system is strictly limited to authorized personnel."
clear banner motd
Usethiscommandtoclearthebannermessageofthedaydisplayedatsessionlogintoablank
string.
Syntax
clear banner motd
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Note: Banner message text must be enclosed in beginning and ending double quotation marks.
The message itself cannot contain any additional double quotation marks.
message Specifiesamessageoftheday.Thisisatextstringthatneedstobein
doublequotesifanyspacesareused.Usea\nforanewlineand\tfora
tab(eightspaces).