To Next Page

To Previous Page

set cos port-resource irl

11-26 Policy Classification Configuration

Mode

Switchcommand,read‐write.

Usage

Thedefaultportgroup0.0cannotbedeleted.

Example

ThisexampledeletesallIRLPortGroupsexceptforthe Defaultgroup0.0:

B5(su)->clear cos port-config irl all

set cos port-resource irl

UsethiscommandtosettheinboundratelimitparametersforaspecificIRLresourceforaspecific

portgroup.

Syntax

set cos port-resource irl group-type-index irl-index {[unit {kbps}] [rate rate]

[type {drop}]}[syslog enable | disable] [trap enable|disable]

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

group‐type‐index Specifiesaninboundratelimitingportgroup/typeindex.Validentriesare

intheformofgroup#.port‐type.

Validvaluesforgroup#canrangefrom0to7.Validvaluesforport‐type

canrangefrom0to1,althoughonlyporttype0is

currentlysupported.

Forexample,portgroup3wouldbespecifiedas3.0.

irl‐index Indexnumberoftheinboundratelimiterresourceassociatedwiththis

entry.Validvaluesrangefrom0to99.

unit Unitofmeasurefortheinboundratelimiter(onlyoptionisKbps).

kbps Kilobitspersecond.

raterate Datarate

forthisinboundratelimiter.Thisistheactualratelimit.Valid

valuesrangefrom512to1,000,000KbpsforaGigabitport.

typedrop Actionfortheratelimiter.Theonlyactionoptionisdroptheframeifall

limitersareexceeded.

syslog

enable|disable

Enableordisablereportingasyslogentry

iflimitersareexceeded.

trapenable|disable Enableordisablesendingatrapiflimitersareexceeded.

Enterasys b5 User Manual

Questions and Answers: