Enterasys b5

clear radius accounting
22-12 Authentication and Authorization Configuration
clear radius accounting
UsethiscommandtoclearRADIUSaccountingconfigurationsettings.
Syntax
clear radius accounting {server ip-address | retries | timeout | counter}
Parameters
Mode
Switchcommand,read‐write.
Defaults
None.
Example
ThisexampleshowshowtoresettheRADI US accountingtimeoutto5seconds.
B5(su)->clear radius accounting timeout
show radius interface
UsethiscommandtodisplaytheinterfaceusedforthesourceIPaddressoftheRADIUS
applicationwhengeneratingRADIUSpackets.
Syntax
show radius interface
Parameters
None.
Defaults
None.
Mode
Switchmode,read‐only.
Example
Thisexampledisplaystheoutputofthiscommand.Inthiscase,theIPaddressassignedto
loopbackinterface1willbeusedasthesourceIPaddressoftheRADIUSapplication.
B5(rw)->show radius interface
loopback 1 192.168.10.1
serverip‐address Clearstheconfigurationononeormoreaccountingservers.
retries Resetstheretriestothedefaultvalueof3.
timeout Resetsthetimeoutto5seconds.
counter Clearscounters.