To Next Page

To Previous Page

set dhcp pool lease

16-22 DHCP Server Configuration

set dhcp pool lease

UsethiscommandtospecifythedurationoftheleaseforanIPaddressassignedbytheDHCP

serverfromtheaddresspoolbeingconfigured.

Syntax

set dhcp pool poolname lease {days [hours [minutes]] | infinite}

Parameters

Defaults

Ifnoleasetimeisspecified,aleasedurationof1dayisconfigured.

Mode

Switchcommand,read‐write.

Example

Thisexampleconfiguresaleasedurationof12hoursfortheaddresspoolbeingconfigured.Note

thattoconfigurealeasetimelessthanoneday,enter0fordays,thenthenumberofhoursand

minutes.

B5(rw)->set dhcp pool auto1 lease 0 12

clear dhcp pool lease

Usethiscommandtorestorethedefaultleasetimevalueofonedayfortheaddresspoolbeing

configured.

Syntax

clear dhcp pool poolname lease

Parameters

Defaults

Clearstheleasetimeforthisaddresspooltothedefaultvalueofoneday.

poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31

charactersinlength.

days Specifiesthe numberofdaysanaddressleasewillremainvalid.Valuecan

rangefrom0to59.

hours (Optional)

Whenadaysvaluehasbeenassigned,specifiesthenumberof

hoursanaddressleasewillremainvalid.Valuecanrangefrom0to1439.

minutes (Optional)Whenadaysvalueandanhoursvaluehavebeenassigned,

specifiesthenumberofminuteanaddressleasewillremainvalid.Value

can

rangefrom0to86399.

infinite Specif iesthatthedurationoftheleasewillbeunlimited.

poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31

charactersinlength.

Enterasys b5 User Manual

Questions and Answers: