Enterasys b5 User Manual

set snmp user
Enterasys B5 CLI Reference 8-9
Ifuserisnotspecif ied,informationaboutallSNMPuserswillbedisplayed.
Ifremoteisnotspecified,userinformationaboutthelocalSNMP enginewillbedisplayed.
Ifastoragetypeisnotspecified,userinformation forallstoragetypeswillbedisplayed.
Mode
Switchcommand,read‐only.
Examples
ThisexampleshowshowtodisplayanSNMPuserlist:
B5(su)->show snmp user list
--- SNMP user information ---
--- List of registered users:
Guest
admin1
admin2
netops
ThisexampleshowshowtodisplayinformationfortheSNMP“guest”user:
(su)->show snmp user guest
--- SNMP user information ---
EngineId: 00:00:00:63:00:00:00:a1:00:00:00:00
Username = Guest
Auth protocol = usmNoAuthProtocol
Privacy protocol = usmNoPrivProtocol
Storage type = nonVolatile
Row status = active
Table 8‐4providesanexplanationofthecommandoutput.
set snmp user
UsethiscommandtocreateanewSNMPv3user.
Syntax
set snmp user user [remote remoteid] [encryption {des | aes}] [privacy
privpassword] [authentication {md5 | sha}] [authpassword] [volatile | nonvolatile]
Table 8-4 show snmp user Output Details
Output Field What It Displays...
EngineId SNMP local engine identifier.
Username SNMPv1 or v2 community name or SNMPv3 user name.
Auth protocol Type of authentication protocol applied to this user.
Privacy protocol Type of encryption protocol applied to this user.
Storage type Whether entry is stored in volatile, nonvolatile or read-only memory.
Row status Status of this entry: active, notInService, or notReady.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English