Enterasys b5 User Manual

show netstat
14-18 Logging and Network Management
Defaults
Ifnoparametersarespecified,shownetstatwillbeexecutedasshownintheexamplebelow.
Mode
Switchcommand,read‐only.
Example
Thefollowingexampleshowshowtodisplaystati sticsforallthecurrentactivenetwork
connections.
B5(su)->show netstat
Prot Local Address Foreign Address State
---- ----------------------------- ----------------------------- -----------
TCP 127.0.0.1.2222 0.0.0.0.* LISTEN
TCP 0.0.0.0.80 0.0.0.0.* LISTEN
TCP 0.0.0.0.23 0.0.0.0.* LISTEN
TCP 10.1.56.17.23 134.141.99.104.47718 ESTABLISHED
UDP 0.0.0.0.17185 0.0.0.0.*
UDP 127.0.0.1.49152 127.0.0.1.17185
UDP 0.0.0.0.161 0.0.0.0.*
UDP 0.0.0.0.* 0.0.0.0.*
UDP 0.0.0.0.514 0.0.0.0.*
Thefollowingtabledescribestheoutputofthiscommand.
Table 14-4 show netstat Output Details
Output Field What it displays...
Prot Type of protocol running on the connection.
Local Address IP address of the connection’s local host.
Foreign Address IP address of the connection’s foreign host.
State Communications mode of the connection.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English