Enterasys b5

To Next Page

To Previous Page

Monitoring Network Events and Status

14-14 Logging and Network Management

Monitoring Network Events and Status

Purpose

Todisplayswitcheventsandcommandhistory,tosetthesizeofthehistorybuffer,andtodisplay

anddisconnectcurrentusersessions.

Commands

history

Usethiscommandtodisplaythecontentsofthecommandhistorybuffer.Thecommandhistory

bufferincludesallthe switchcommandsentereduptoamaximumof100,asspecifiedintheset

historycommand(“sethistory”onpage 14‐15).

Syntax

history

Parameters

None.

Defaults

None.

Mode

Switchcommand,read‐only.

Example

Thisexampleshowshowtodisplaythecontentsofthecommandhistorybuffer.Itshowsthereare 

fivecommandsinthebuffer:

B5(su)->history

1 hist

2 show gvrp

3 show vlan

4 show igmp

5 show ip address

For information about... Refer to page...

history 14-14

show history 14-15

set history 14-15

ping 14-16

show users 14-16

disconnect 14-17

show netstat 14-17