Enterasys b5

set multiauth precedence
22-40 Authentication and Authorization Configuration
Example
Thisexampleshowshowtoclearthesystemauthenticationmode:
B5(rw)->clear multiauth mode
set multiauth precedence
Usethiscommandtosetthesystem’smultipleauthenticationadministrativeprecedence.
Syntax
set multiauth precedence {[dot1x] [mac] [pwa]}
Parameters
Defaults
Defaultprecedenceorderisdot1x,pwa,mac.
Mode
Switchcommand,read‐write.
Usage
Whenauserissuccessfullyauthenticatedbymorethanonemethodatthesametime,the
precedenceoftheauthenticationmethodswilldeterminewhichRADIUS ‐returnedfilterIDwillbe
processedandresultinanappliedtrafficpolicyprofile.
Example
ThisexampleshowshowtosetprecedenceforMACauthentication:
B5(rw)->set multiauth precedence mac dot1x
clear multiauth precedence
Usethiscommandtoclearthesystem’smultipleauthenticationadministrativeprecedencetothe
defaultprecedenceorder.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
dot1x Setsprecedencefor802.1Xauthentication.
mac SetsprecedenceforMACauthentication.
pwa Setsprecedenceforportwebauthentication