Enterasys b5

set sntp poll-retry
14-34 Logging and Network Management
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheSNTPpollinterval:
B5(su)->clear sntp poll-interval
set sntp poll-retry
UsethiscommandtosetthenumberofpollretriestoaunicastSNTPserver.
Syntax
set sntp poll-retry retry
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthenumberofSNTPpollretriesto5:
B5(su)->set sntp poll-retry 5
clear sntp poll-retry
UsethiscommandtoclearthenumberofpollretriestoaunicastSNTPserver.
Syntax
clear sntp poll-retry
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
retry Specifiesthenumberofretries.Validvaluesare0to10.