Enterasys b5

To Next Page

To Previous Page

clear spantree lpcapablepartner

Enterasys B5 CLI Reference 9-47

Defaults

Ifnoport‐stringisspecified,LoopProtectcapabilityforlinkpartnersisdisplayedforallports.

Mode

Switchcommand,read‐only.

Example

ThisexampleshowshowtodisplaytheLoopProtectpartnercapabilityforge.1.1:

B5(rw)->show spantree lpcapablepartner port ge.1.1

Link partner of port ge.1.1 is not LoopProtect-capable

clear spantree lpcapablepartner

UsethiscommandtoresettheLoopProtectcapabilityofportlinkpartnerstothedefaultstateof

false.

Syntax

clear spantree lpcapablepartner port-string

Parameters

Defaults

None.

Mode

Switchcommand,read‐write.

Example

ThisexampleshowshowtoresettheLoopProtectpartnercapabilityforge.1.1:

B5(rw)->clear spantree lpcapablepartner ge.1.1

set spantree lpthreshold

UsethiscommandtosettheLoopProtecteventthreshold.

Syntax

set spantree lpthreshold value

Parameters

port‐string Specifiesport(s)forwhichtocleartheirlinkpartners’LoopProtect

capability(resettofalse).

value Specifiesthenumberofeventsthatmustoccurduringtheevent

windowinordertolockaport/SID.Thedefaultvalueis3events.A

thresholdof0specifiesthatportswillneverbelocked.