Enterasys b5 - Clear Snmp Group; Show Snmp Community

clear snmp group
Enterasys B5 CLI Reference 8-13
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocreateanSNMPgroupcalled“anyone”,assignausernam ed“public”
andassignSNMPv3securitytothegroup:
B5(su)->set snmp group anyone user public security-model usm
clear snmp group
UsethiscommandtoclearSNMPgroupsettingsgloballyorforaspecificSNMPgroupanduser.
Syntax
clear snmp group groupname user [security-model {v1 | v2c | usm}]
Parameters
Defaults
If not specified, settings related to all security models will be cleared.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearallsettingsassignedtothe“public”userwithintheSNMPgroup
“anyone”:
B5(su)->clear snmp group anyone public
show snmp community
UsethiscommandtodisplaySNMPcommunitynamesandstatus.InSNMPv1andv2,
communitynamesactaspasswordstoremotemanagement.
Syntax
show snmp community [name]
Parameters
Defaults
Ifnameisnotspecified,informationwillbedisplayedforallSNMPcommunities.
groupname SpecifiestheSNMPgrouptobecleared.
user SpecifiestheSNMPusertobecleared.
security‐modelv1|
v2c|usm
(Optional)Clearsthesettingsassociatedwithaspecificsecuritymodel.
name (Optional)DisplaysSNMPinformationforaspecificcommunityname.