Enterasys b5

set sntp poll-timeout
Enterasys B5 CLI Reference 14-35
Example
ThisexampleshowshowtoclearthenumberofSNTPpollretries:
B5(su)->clear sntp poll-retry
set sntp poll-timeout
Usethiscommandtosetthepolltimeout(inseconds)foraresponsetoaunicastSNTPrequest.
Syntax
set sntp poll-timeout timeout
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosettheSNTPpolltimeoutto10seconds:
B5(su)->set sntp poll-timeout 10
clear sntp poll-timeout
UsethiscommandtocleartheSNTPpolltimeout.
Syntax
clear sntp poll-timeout
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtocleartheSNTPpolltimeout:
B5(su)->clear sntp poll-timeout
timeout Specifiesthepolltimeoutinseconds.Validvaluesare1to30.