To Next Page

To Previous Page

set vlanauthorization

22-50 Authentication and Authorization Configuration

set vlanauthorization

EnableordisabletheuseoftheRADIUSVLANtunnelattributetoputaportintoaparticular

VLANbasedontheresultofauthentication.

Syntax

set vlanauthorization {enable | disable} [port-string]

Parameters

Defaults

VLANauthenticationisdisabledbydefault.

Mode

Switchcommand,read‐write.

Examples

ThisexampleshowshowtoenableVLANauthenticationforallGigabitEthernetports:

B5(rw)-> set vlanauthorization enable ge.*.*

ThisexampleshowshowtodisableVLANauthenticationforallGigabitEthernetportsonswitch

unit/module 3:

B5(rw)-> set vlanauthorization disable ge.3.*

set vlanauthorization egress

ControlsthemodificationofthecurrentVLANegresslistof802.1xauthenticatedportsforthe

VLANsreturnedintheRADIUSauthorizationfilteridstring.

Syntax

set vlanauthorization egress {none | tagged | untagged} port-string

Parameters

enable|disable Enablesordisablesvlanauthorization/tunnelattributes.

port‐string (Optional)SpecifieswhichportstoenableordisabletheuseofVLAN

tunnelattributes/authorization.Foradetaileddescriptionofpossibleport‐

stringvalues,referto“PortStringSyntaxUsedintheCLI”onpage 7‐1.

none Specifiesthatnoegressmanipulationwillbemade.

tagged Specifiesthattheauthenticatingportwillbeaddedtothecurrenttagged

egressfortheVLAN‐IDreturned.

untagged Specifiesthattheauthenticatingportwillbeaddedtothecurrent

untaggedegressfortheVLAN‐IDreturned(default).

port‐string Specifiesthattheport

orlistofports.towhichthiscommandwillapply.

Foradetaileddescriptionofpossibleport‐stringvalues,referto“Port

StringSyntaxUsedintheCLI”onpage 7‐1.

Enterasys b5 User Manual

Questions and Answers: