Enterasys b5 - Show Tacacs Command; Set Tacacs Command

show tacacs command
Enterasys B5 CLI Reference 23-9
show tacacs command
Usethiscommandtodisplaythestatus(enabledordisabled)ofTACACS+accountingor
authorizationonaper‐commandbasis.
Syntax
show tacacs command {accounting | authorization}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtodisplaythestateofthe TACACS+client’scommandauthorization.
B5(rw)->show tacacs command authorization
TACACS+ command authorization state: enabled
set tacacs command
UsethiscommandtoenableordisableTACACS+accountingorauthorizationonaper‐command
basis.
Syntax
set tacacs command {accounting | authorization} {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
Inorderforper‐commandaccountingorauthorizationbyaTACACS+servertotakeplace,the
commandmustbeexecutedwithinanauthorizedsession.
accounting DisplaythestatusofTACACS+accountingonaper‐commandbasis.
authorization DisplaythestatusofTACACS+authorizationonaper‐commandbasis.
accounting|
authorization
SpecifieseitherTACACS+accountingorauthorizationtobeenabledor
disabled.
enable|disable Enableordisableaccountingorauthorizationonaper‐commandbasis.