Enterasys b5 - Clear Vlan; Set Vlan Name

set vlan name
10-6 802.1Q VLAN Configuration
set vlan name
UsethiscommandtosetorchangetheASCIInameforaneworexistingVLAN.
Syntax
set vlan name vlan-list vlan-name
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthenameforVLAN7togreen:
B5(su)->set vlan name 7 green
clear vlan
UsethiscommandtoremoveastaticVLANfromthelistofVLANsrecognizedbythedevice.
Syntax
clear vlan vlan-list
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoremoveastaticVLAN9fromthedevice’sVLANlist:
B5(su)->clear vlan 9
vlan‐list Specif iestheVLANIDoftheVLAN(s)tobenamed.
vlan‐name SpecifiesthestringusedasthenameoftheVLAN(1to32characters).
vlan‐list Specif iestheVLANIDoftheVLAN(s)toberemoved.