To Next Page

To Previous Page

set rmon channel

15-18 RMON Configuration

Example

ThisexampleshowshowtodisplayRMONchannelinformationforge.2.12:

B5(rw)->show rmon channel ge.2.12

Port ge.2.12 Channel index= 628 EntryStatus= valid

----------------------------------------------------------

Control off AcceptType matched

OnEventIndex 0 OffEventIndex 0

EventIndex 0 Status ready

Matches 4498

Description Thu Dec 16 12:57:32 EST 2004

Owner NetSight smith

set rmon channel

UsethiscommandtoconfigureanRMONchannelentry.

Syntax

set rmon channel index port-string [ accept { matched | failed}] [control { on | off}]

[description description] [owner owner]

Parameters

Defaults

Ifanactionisnotspecified,packetswillbeacceptedonfiltermatches.

Ifnotspecified,controlwillbesettooff.

Ifadescriptionisnotspecified,nonewillbeapplied.

Ifownerisnotspecified,itwillbesettomonitor.

Mode

Switchcommand,read‐write.

index Specifiesanindexnumberforthisentry.Anentrywillautomaticallybe

createdifanunusedindexnumberischosen.Maximumnumberof

entriesis2.Maximumvalueis65535.

port‐string Specifiestheportonwhichtrafficwillbemonitored.

acceptmatched|

failed

(Optional)Specifiesthe

actionofthefiltersonthischannelas:

• matched‐Packetswillbeacceptedonfiltermatches

• failed‐Packetswillbeacceptediftheyfailamatch

controlon|off (Optional)Enablesordisablescontroloftheflowofdatathroughthe

channel.

description

description

(Optional)Specifiesadescriptionforthischannel.

ownerowner (Optional)Specifiesthenameoftheentitythatconfiguredthisentry.

Enterasys b5 User Manual

Questions and Answers: