set maclock disable
Enterasys B5 CLI Reference 22-61
MAClockingisdisabledbydefaultatdevicestartup.ConfiguringoneormoreportsforMAC
lockingrequiresgloballyenablingitonthedeviceandthenenablingitonthedesiredports.
Example
ThisexampleshowshowtoenableMAClockingonge.2.3:
B5(su)->set maclock enable ge.2.3
set maclock disable
UsethiscommandtodisableMAClockinggloballyorononeormoreports.
Syntax
set maclock disable [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,MAClockingwillbedisabledgloballyontheswitch.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtodisableMAClockingonge.2.3:
B5(su)->set maclock disable ge.2.3
set maclock
UsethiscommandtocreateastaticMACaddress‐to‐portlocking,andtoenableordisableMAC
lockingforthespecifiedMACaddressandport.
Syntax
set maclock mac-address port-string {create | enable | disable}
Parameters
port‐string (Optional)DisablesMAClockingonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 7‐1.
mac‐address SpecifiestheMACaddressforwhichMAClockingwillbecreated,
enabledordisabled.
port‐string Specifiestheportonwhichtocreate,enableordisableMAClockingfor
thespecifiedMAC.Foradetaileddescriptionofpossibleport‐string
values,referto“PortStringSyntaxUsedintheCLI
”onpage 7‐1.
To Next Page
Loading...