Enterasys b5 User Manual

Enterasys B5 CLI Reference 11-1
11
Policy Classification Configuration
ThischapterdescribesthePolicyClassificationsetofcommandsandhowtousethem.
Policy Classification Configuration Summary
EnterasysB5devicessupportpolicyprofile‐basedprovisioningofnetworkresourcesbyallowing
ITadministratorsto:
•Create,changeorremovepolicyprofilesbasedonbusiness‐specificuseofnetworkservices.
•Permitordenyaccesstospecificservicesbycreatingandassigningclassificationruleswhich
mapuserprofilestoprotocol‐basedframefiltering
policiesconfiguredforaparticularVLAN
orClassofService(CoS).
• Assignorunassignportstopolicyprofilessothatonlyportsactivatedforaprofilewillbe
allowedtotransmitframesaccordingly.
For information about... Refer to page...
Policy Classification Configuration Summary 11-1
Configuring Policy Profiles 11-2
Configuring Classification Rules 11-6
Assigning Ports to Policy Profiles 11-14
Configuring Policy Class of Service (CoS) 11-16
Note: An Enterasys Networks Feature Guide document containing an in-depth discussion of Policy
configuration is located on the Enterasys Networks web site:
https://extranet.enterasys.com/downloads/
Note: It is recommended that you use Enterasys Networks NMS Policy Manager as an alternative
to CLI for configuring policy classification on the Enterasys B5 devices.

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English