Enterasys b5

clear port protected name
Enterasys B5 CLI Reference 7-61
Example
Thisexampleshowshowtoshowthenameofprotectedportgroup1:
B5(ro)->show port protected name 1
Group ID Group Name
-----------------------------
1 group1
clear port protected name
Usethiscommandtoclearthenameofaprotectedgroup.
Syntax
clear port protected name group-id
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoclearthenameofprotectedportgroup1:
B5(rw)->clear port protected name 1
group‐id Specifiestheidofthegroupforwhichtoclearthename.Idcanrange
from0to2.