Enterasys b5

To Next Page

To Previous Page

set port mdix

Enterasys B5 CLI Reference 7-21

Defaults

Ifport‐stringisnotentered,allportsontheswitchareconfigured.

Mode

Switchcommand,read‐write.

Usage

Bydefault,Enterasys Networksswitchdevicesareconfiguredtoautomaticallydetectthecable

typeconnection,straightthrough(MDI)orcross‐over(MDIX),requiredbythecableconnectedto

theport.YoucanconfigureportstoonlyuseMDIorMDIXconnectionswiththiscommand.

ThiscommandonlyconfiguresEthernetports,andcannot

beusedtoconfigurecomboportson

theswitch.FiberportsalwayshaveastatusofMDIX.

Example

Thisexampleconfiguresportsge.1.1andge.1.2touseMDIXmode.

B5(su)->set port mdix mdix ge.1.1-2

mdi ConfigureportstouseMDImodeonly.

mdix ConfigureportstouseMDIXmodeonly.

port‐string (Optional)Specifytheportorportstoconfigure.