Enterasys b5 User Manual

Enabling Router Configuration Modes
Enterasys B5 CLI Reference 18-3
Router Configuration
Mode
Set IP protocol
parameters.
Type router and the
protocol name from
Global or Interface
Configuration mode.
B5(su)->router(Config-router)#
Note: To jump to a lower configuration mode, type exit at the command prompt. To revert back to
switch CLI, type exit from Privileged EXEC router mode.
Table 18-2 Router CLI Configuration Modes (Continued)
Use this mode... To... Access method... Resulting Prompt...

Enterasys b5 Specifications

General

Brand	Enterasys
Model	b5
Category	Other
Language	English