Enterasys b5

show dot1x
22-16 Authentication and Authorization Configuration
Ifport‐stringisnotspecified,informationforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
Examples
Thisexampleshowshowtodisplay802.1Xstatus:
B5(su)->show dot1x
DOT1X is disabled.
Thisexampleshowshowtodisplayauthentication diagnosticsinformationforge.1.1:
B5(su)->show dot1x auth-diag ge.1.1
Port : 1 Auth-Diag
Enter Connecting: 0
EAP Logoffs While Connecting: 0
Enter Authenticating: 0
Success While Authenticating 0
Timeouts While Authenticating: 0
Fails While Authenticating: 0
ReAuths While Authenticating: 0
EAP Starts While Authenticating: 0
EAP logoff While Authenticating: 0
Backend Responses: 0
Backend Access Challenges: 0
Backend Others Requests To Supp: 0
Backend NonNak Responses From: 0
Backend Auth Successes: 0
Backend Auth Fails: 0
Thisexampleshowshowtodisplayauthentication statisticsforge.1.1:
B5(su)->show dot1x auth-stats ge.1.1
Port: 1 Auth-Stats
EAPOL Frames Rx: 0
EAPOL Frames Tx: 0
EAPOL Start Frames Rx: 0
EAPOL Logoff Frames Rx: 0
EAPOL RespId Frames Rx: 0
EAPOL Resp Frames Rx: 0
EAPOL Req Frames Tx: 0
EAP Length Error Frames Rx: 0
Last EAPOL Frame Version: 0
Last EAPOL Frame Source: 00:00:00:00:00:00
Thisexampleshowshowtodisplaythestatusofportreauthenticationcontrolforge.1.1through
ge.1.6:
B5(su)->show dot1x port reauth ge.1.1-6
Port 1: Port reauthenticate: FALSE
Port 2: Port reauthenticate: FALSE
Port 3: Port reauthenticate: FALSE
Port 4: Port reauthenticate: FALSE
Port 5: Port reauthenticate: FALSE
Port 6: Port reauthenticate: FALSE