Enterasys SecureStack B3

clear lldp port status
4-30 Discovery Protocol Configuration
clear lldp port status
Usethiscommandtoreturntheportstatustothedefaultvalueofboth(bothtransmittingand
processingreceivedLLDPDUsareenabled).
Syntax
clear lldp port status port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplereturnsportge.1.1tothedefaultstateofenabledforbothtransmittingand 
processingreceivedLLDPDUs.
B3(rw)->clear lldp port status ge.1.1
clear lldp port trap
UsethiscommandtoreturntheportLLDPtrapsettingtothedefaultvalueofdisabled.
Syntax
clear lldp port trap port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplereturnsportge.1.1tothedefaultLLDPtrapstateofdisabled.
B3(rw)->clear lldp port trap ge.1.1
clear lldp port med-trap
UsethiscommandtoreturntheportLLDP‐MEDtrapsettingtothedefaultvalueofdisabled.
port‐stringSpecifiestheportorrangeofportstobeaffected.
port‐string Specifiestheportorrangeofportstobeaffected.